CNC Deep Hole Machine Tools for Mexico

CNC Deep Hole Machine Tools for Manufacturing in Mexico

Views :

Update time : 2026-08-05

Mexico · Engineering review

CNC Deep Hole Machine Tools for Manufacturing in Mexico

Select the process from the workpiece, material, L/D, tolerance, finish and annual volume. Final capability is confirmed through project-specific engineering review.

Send a Drawing for a Process Proposal Compare the Five Processes

Process selection

Compare five deep-hole machining routes

Each range is a planning reference, not a universal guarantee. The final route depends on the drawing, starting condition and acceptance method.

CNC Deep Hole Drilling & Boring

Typical planning range: bores about 20–500 mm and depth up to about 16,000 mm, depending on the selected model and process route.

Review this process

CNC Gun Drilling

Typical planning range: about 3–40 mm and up to about 3,000 mm. Material, L/D, coolant and chip removal must be reviewed.

Review this process

CNC Deep Hole Honing

Typical planning range: about 25–500 mm and up to about 8,000 mm. Final tolerance and finish depend on the pre-bore.

Review this process

CNC Skiving & Roller Burnishing

Typical planning range: ID about 40–500 mm and length up to about 8,000 mm for a suitable tube, allowance and process window.

Review this process

Multi-Station Gun Drilling

A gun-drilling cell for repeat part families. Station count follows the workpiece, takt, loading, coolant, tool and inspection plan.

Review this process

Target applications

Workpieces available for engineering review

These are target applications and do not claim completed projects in Mexico.

Engine and transmission shafts
Mould cooling channels
Valve bodies and stems
Hydraulic cylinder tubes
Heavy-vehicle and equipment components
Precision sleeves and tubes

Enquiry data

What a responsible proposal needs

Workpiece drawing and critical features
Material, heat treatment and hardness
Starting bore or blank condition
Hole diameter, depth and L/D
Stock allowance and interrupted features
Tolerance, straightness and concentricity
Required surface roughness
Clamping and datum surfaces
Annual volume and target cycle time
Plant utilities and acceptance method

Installation, training, remote support, spare parts and any on-site work are confirmed in writing for each project. No local network is assumed.

Frequently asked questions

Before requesting a machine configuration

Which process should we use for a deep bore?

Gun drilling is normally evaluated for smaller high L/D holes; drilling and boring or BTA for larger diameters and stock removal; honing or SRB for final size and finish. The drawing and starting bore control the route.

Can you quote from diameter and depth alone?

Not responsibly. Material, hardness, tolerance, straightness, roughness, starting condition, quantity and target cycle are also required.

Are the published ranges guaranteed for every workpiece?

No. They are typical planning ranges. Final capability follows engineering review, model and tooling selection, coolant, chip removal and the signed technical agreement.

How is machine acceptance defined?

The sample, measuring method, instruments, critical features and acceptance criteria must be agreed in writing before manufacture.

Is local service in Mexico included?

Installation, training, remote support, spare parts and any on-site service must be confirmed expressly in the proposal and contract.

Send the workpiece data to start the review

Include material, diameter, depth, starting condition, tolerance, roughness, annual volume and target cycle. The contact form opens on the main website.

Contact Engineering

Leave Your Message