CNC Deep Hole Honing Machine for UK Manufacturers
Drawing-led machine selection
CNC Deep Hole Honing Machine for UK Manufacturers
CNC Deep Hole Honing Machine selection for aerospace components, moulds, hydraulic parts, energy equipment and precision engineering. Guanghe reviews the workpiece, starting condition, tolerance, output and acceptance method before proposing a configuration.
When this process is a suitable starting point
For correcting bore geometry and producing the specified surface texture after drilling, boring or tube preparation. Diameter tolerance, straightness, cylindricity and roughness must be reviewed separately.
| When this process is a suitable starting point | Parameters required for an engineering review |
|---|---|
| CNC Deep Hole Honing Machine | Typical planning range: bore diameter about 25–500 mm and honing length up to about 8,000 mm. Final capability depends on the pre-bore, allowance, material, tooling and acceptance method. |
| Target workpiece families | aerospace components, moulds, hydraulic parts, energy equipment and precision engineering |
| Acceptance and proposal boundary | State UK conformity, guarding, electrical and documentation requirements in the enquiry. |
Parameters required for an engineering review
- Workpiece drawing and critical features
- Material, heat treatment and hardness
- Starting bore or blank condition
- Hole diameter, depth and L/D ratio
- Stock allowance and interrupted features
- Tolerance, straightness and concentricity
- Surface roughness and inspection method
- Annual volume and target cycle time
- Clamping datum and automation interface
- Plant utilities and conformity requirements
Target workpiece families
- aerospace components
- moulds
- hydraulic parts
- energy equipment and precision engineering
Acceptance and proposal boundary
Published ranges are planning references, not a guarantee for every workpiece. Diameter, depth, accuracy, cycle time, tooling and price are confirmed only after drawing review and written acceptance criteria.
State UK conformity, guarding, electrical and documentation requirements in the enquiry.
Frequently asked questions
Can you quote from a machine name only?
No. A responsible proposal needs the drawing, material, hole data, tolerance, surface requirement, quantity and target takt.
Is the published range guaranteed?
No. Final capability depends on the selected model, tooling, material, coolant, workholding and inspection method.
Can the machine connect to an existing line?
Interfaces can be reviewed after loading, datum, takt, utilities and upstream/downstream signals are supplied.
How is acceptance defined?
The sample, measuring method, instrument, sampling plan and limits should be agreed in writing.
Send the drawing for a technical proposal
Submit material, diameter, depth, tolerance, roughness, quantity and target cycle time through the form on this page.
Related topic: CNC Deep Hole Honing Machine
Related topic: deep hole machine
CNC Gun Drilling Machine for U
CNC Deep Hole Honing Machine f
CNC Deep Hole Drilling and Bor
CNC Deep Hole Machine Tools fo