Single-Station vs Multi-Station Gun Drilling Machine
Single-station machines favor flexibility and difficult parts; multi-station systems favor repeat families and higher output when fixtures, coolant and chip handling can support parallel cutting.
Direct Engineering Answer
Choose the smallest station count that meets output with process margin. More stations increase fixture, filtration, monitoring and loading requirements.
Inputs Required Before Selection
| Input | Engineering review |
|---|---|
| Hole diameter and depth | Defines the process family, spindle, tooling and coolant requirement. |
| Material and hardness | Controls cutting speed, tool grade, chip formation and expected tool life. |
| Tolerance, straightness and roughness | Determines whether drilling alone is sufficient or boring, honing or SRB is required. |
| Volume and takt time | Determines single-station, multi-station or automated cell layout. |
Recommended Decision Process
- Confirm the drawing and incoming blank condition.
- Identify the most difficult diameter, depth, material and tolerance combination.
- Select the process route and define what each operation must achieve.
- Define tooling, coolant, filtration, fixture and station layout.
- Agree the sample, measurement tools, locations and acceptance criteria.
Common Purchasing Risk
A nominal machine range is not a guarantee for every workpiece. Final capacity, cycle time and quality should be confirmed in a signed technical agreement and, where needed, by representative trial processing.
Frequently Asked Engineering Questions
Single-Station vs Multi-Station Gun Drilling Machine
Choose the smallest station count that meets output with process margin. More stations increase fixture, filtration, monitoring and loading requirements.
What should be sent for a machine recommendation?
Send the workpiece drawing, material, hardness, diameter, depth, tolerance, straightness, roughness, quantity and target cycle.
Submit Workpiece Parameters for a Process Proposal
Send the drawing, material, hole diameter, depth, tolerance, roughness and annual output. Guanghe engineers will review the process route, station layout, tooling and acceptance method.
Request a Technical Proposal